Aerus Lux Guardian Upright Bedienungsanleitung PDF herunterladen (Seite 6)

The operating handle of your new Lux® Guardian can

easily be attached to your cleaner as follows:

CAUTION:

Be sure unit is NOT plugged in

efore assembling handle.

• Locate the handle assembly . Remove the mounting screw

and nut plate from the handle.

• Open the cleaner bag compartment lid, remove the filter bag.

Place the nut plate into the pocket inside the bag

compartment as shown.

• Fit the end of the handle into the handle receptacle

IMPORTANT: Press down firmly when plugging handle into the

receptacle.

• Hold the handle against the bag compartment, attach the carry

handle and thread the mounting screw through the

handles into the nut plate.

• Tighten the mounting screw securely using a screwdriver.

NOTE: The handle must be properly inserted into the

receptacle for the screw to engage the nut plate(2).

• The accessory plug is an electrical connection for

powered accessories such as the Sidekick®.

• Attach HEPA Filter per header card instructions.

NOTE:

This appliance has a polarized plug (one

blade is wider than the other). This plug will fit in a polarized

outlet only one way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does

not fit, contact a qualified electrician to install the

proper outlet. Do not change the plug in any way.

HANDLE ASSEMBLY

POWER CORD STORAGE

Your cleaner includes a combination cord cleat/cord holder: To

remove the cord, rotate the cord cleat until the power cord is

released . Remove the cord from the lower cord wrap. Connect

the cord plug into a 120V/60Hz power supply.

As an additional feature the cord cleat serves as a cord holder

while the cleaner is in use. Rotate the cord cleat until it snaps into

the "Release" position, the top portion of the cord cleat forms a

cord holder. Snap the

cord into the holder

and the cord will

be held out of the way

while you vacuum.

To store the cord:

Rotate the cord cleat

into the "Storage"

position. Wrap the cord

around the cord cleat

and the lower cord wrap . Snap the end of the cord plug over

the cord for secure storage.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Aerus Lux Guardian Upright Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Staubsauger Aerus Lux Guardian Upright